spacer
Easy2DIY Logo

Your Home for Do-It-Yourself
Home Improvement and Home Repair
Tutorials, Tips, Advice, Projects & Products

Google
 
Web Easy2DIY.com
spacer spacer

Exterior Caulking



Materials List
Appropriate caulk (in cartridges)
Rags and/or paper towels
Tools List (click item to shop)
Step ladder
Extension ladder
Caulk gun
Work gloves
Easy2 Home Improvement
Installing Blown-In Insulation
Easy2DIY
Exterior Painting
Exterior Paint Preparation
Applying Temporary Weatherstripping
Applying Permanent Weatherstripping
The Flood Co.
Restora

IMPORTANT: Read this before you start


Introduction

The purpose of exterior caulking is to fill or cover cracks, seams and gaps where drafts or moisture might get into your house, or conversely, where heated or air-conditioned air might leak out. Caulking helps keep your house weather-tight, lowers heating and cooling bills, and prevents damage. It can also help keep insects and other “critters” out of your house. When you caulk before painting, it eliminates edges where the paint may start to peel, so you won’t have to repaint as often.

This tutorial provides helpful hints and tips to do the job quickly and without hassles. By following these easy steps, you’ll enjoy greater comfort, and protect the investment you’ve made in your home.


Skill Level & Time To Complete
It varies depending on the size of the house and the number of people working. For a typical ranch house, consider the following estimates as a starting point:
• Beginner - 4 to 5 hours
• Intermediate - 3 to 4 hours
• Advanced - 2 to 3 hours

Cautions
Many of the steps that follow may require a ladder. Use care, and be aware of where you are at all times. Follow all precautions on the ladder’s warning stickers.

Common Mistakes
Don’t go back over a freshly-caulked area until the caulk has had a chance to cure.

Helpful Tips
Remove all old caulk and make sure the surface where you apply the new caulk is clean and dry.

1. There are two factors to consider in choosing caulk. The first is how the caulk is designed to be used. Generally, any brand of exterior silicone caulk will give excellent results. Don’t use interior-grade products for outside applications. The second factor is the warranty. The longer the warranty period of the caulk, the better quality it is. Higher quality caulk will seal better and stay more flexible, and is worth the extra cost.
2. To load the caulk gun, use your thumb to press the release on the rear of the gun, and pull the plunger all the way back. Slip the cartridge into the gun and push the plunger in snugly. Take your thumb off the release.
3. Cut the end of the nozzle on the cartridge so the opening matches the size of the gap or seam you’re sealing. Then use a screwdriver or length of stiff wire to puncture any inner seal in the cartridge.
4. Place the nozzle at a 45° angle to the seam being sealed. Gently squeeze the handle of the caulk gun and draw the gun backwards, toward yourself. It takes just a little practice to match the pressure on the handle and the speed at which you move the gun to get a smooth, even flow. When you can’t squeeze the handle any more, release it and it will spring back out, ready for you to continue. Caulk may flow more quickly at the end of each squeeze, so take care you don’t get a “blob” all at once. Caulk will also continue to flow a little more evenly when you release pressure on the handle; wipe up any extra with a rag or paper towel.
5. There’s no need to flatten or shape the bead of caulk to get it to look concave, or depressed. When the caulk is first applied, the bead is convex; as it cures, it will shrink slightly and form a concave seal.
6. To seal an especially large or deep gap or seam, you will need more than just caulk. You shouldn’t “fill” a large gap with caulk. Instead, place some other filler material in the opening, such as wood, fabric, paper, insulation or even rope, until the opening can be sealed at the surface.
7. Areas to be caulked include 1) where siding meets doors and windows, 2) along house trim, 3) at corners of the house, 4) around outside faucets and dryer vents, and 5) where the siding meets the foundation.
8.

For new construction, or if you’ve installed replacement windows or doors, you’ll want to caulk between the window- or door-frame and the wall studs, before you put the siding (back) on.

Now enjoy your newly weatherproofed home!




 
 
 

 

Copyright© 2001-2014 Easy2.com, Inc. All rights reserved.
About Us | Contact Us | Privacy & Legal