Your Home for Do-It-Yourself
Home Improvement and Home Repair
Tutorials, Tips, Advice, Projects & Products

Product List

• Turns your power drill into a power shear
• Inserts into chuck of an A/C or cordless drill
• 20 gauge capacity in galvanized steel
• Navigates tight patterns and square cuts
• TSDC Drill Clamp can be purchased separately
• Made in the USA

• General Usage: These aviation tin snips are built to cut through thin sheets of metal and aluminum tin. Allowing the greatest amount of force created from the compound design of the shears
• Product Features: These compound snips provides two pivot points that help reduce the amount of pressure that is needed to cut. A hook feature is included to help keep snips closed.
• Composition: Aviation snips are spring loaded pliers. This will also help with the amount of force and stress that is needed when using the snips over time.
• Includes: Bastex Aviation Sinps
• Warranty: 30 Day Money Back / 12 Month Replacement Warranty Included

• ALL-IN-ONE DESIGN ENHANCES WORK EFFICIENCY AND SAVE SPACE. Kaka 30in 3-in-1 sheet metal machine is good choice for small shops that have low production runs or have a lot of one off projects. This machine combines three functions into one that utilizes up little floor space and enhances work efficiency. If your shop space is limited, you can still have the job done perfectly
• 20 GAUGES CAPACITY AND 30 INCH WIDE BED WIDTH ENSURES SMOOTH WORK FLOW. This 3-IN-1 sheet metal machine has the capacity up to 20 gauges mild steel and 16 gauge aluminum in widths up to 30-inches wide. It is a perfect combination machine for sheet metal machine to the length of 30" and thickness of 1/25" cutting stop. The roll bending starting with diameter of 1 1/2" also guarantees enough capacity
• ADJUSTABLE FINGERS ENSURES FLEXIBILITY AND PRECISION. The vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes. The slip roll portion has three wire grooves, and can form rolls down to 1-35/64-inches in diameter. Both feature guarantees adjustability and high accuracy
• VERSATILITY AND EASY ALIGNMENT. This 30" brake shear roll can be utilized to cut multiple materials. The shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc. The 3-in-1 sheet metal brakes, sheet metal shears and slip roll machine has detailed manuals and a short video is also available on YouTube to give specific instruction on how to resemble it effortlessly
• SOLID CONSTRUCTION AND LONG TERM INVESTMENT. This 3-IN-1 brake shear roll has a heavy cast iron Frame. The slip roll portion of the shear brake roll has hardened and polished shafts for long life. This 30" 3-in-1 sheet metal brake, shears and slip roll machine is designed to perform at a harsh condition and can stand for a longer life. It would be a good investment from long-term perspective

• Speed: 1800 SPM (no load); Cuts up to 150 in. per minute in 24 gauge mild steel
• Sliding On/Off Switch
• Maximum cutting capacity: 18 gauge mild steel, 22 gauge stainless steel
• Includes: Metal shears, cutting blades, hex key, spare carbon brushes, instruction manual
• 3.5 amp, 120v/60hz AC

• Replace the blades rather than the entire TuroShear
• Cuts approximately 2000 linear feet per set of blades
• Instructions included

• Industrial 52" combination 3-in-1 shear/brake/roll
• Max. shearing thickness: 1.5 mm = 16 Gauge ; Max. bending thickness: 1.5 mm = 16 Gauge
• Max. Bending Angle: 90° ; Max Internal Roll Diameter: ? 60
• Rolling Thickness: 1.5 mm = 16 Gauge
• Quantity: 1 ; Unit overall dimensions: 67" x 20" x 65"

• Hardened and tempered Carbon blades
• Straight blade design for general purpose metal shearing and cutting
• 12" (300mm) full length, 700g weight
• Cutting Range: Maxium 1.2mm largo rolled iron, Maxium 0.7mm steel Plate

• 8" Manual Hand Shear
• Rod Capacity: 3/8"
• Plate Capacity: 3/16"

• 12" metal snips
• shear
• high carbon construction
• double dip handle
• comfort and grip

• SOLID STEEL FRAME WITH HARDENED HIGH CARBON STEEL BLADE. KAKA Industrial MS-20 manual hand shear has a very strong base steel frame, which will hold the stability during work. Also, this metal cutter is equipped with a high carbon steel blade, which can be served for long-time use
• CAN BE USED CUTTING MULTIPLE MATERIALS. This sheet metal manual shear is capable of cutting materials such as rebar, rod steel, square or flat steel. It gives great versatility when you choose to cut
• GREAT CAPACITY THROUGHOUT CUTTING. This metal shear can cut 3/4-Inch round steel, 1.1"x0.3" flat steel; as for square steel, it can cut 3/4"x3/4". The cutting capacity will largely satisfy your work requirements
• EASY OPERATION WITH EFFORTLESS CUTTING. The metal shear can bolt to bench or table; in a large extent, it makes the work more easier
• LONG HANDLE ALLOWS MORE LEVERAGE. This metal shear comes with a long handle separately. The long handle will make the work more smooth and leave your back free when you are doing a cutting. It would be a smart purchase