Your Home for Do-It-Yourself
Home Improvement and Home Repair
Tutorials, Tips, Advice, Projects & Products

Product List

• Random-orbit, swirl-free sanding/polishing action
• Electronic variable-speed dial from 2,500-6,800 OPM
• Features a proprietary counter balance for use with 6-inch sanding/polishing pad
• Accepts 5/16-inch to 24-inch spindle thread accessories
• Features a 2-position (left or right) removable side handle for greater comfort and control

• 150 psi max tank pressure stores more air in the tank for longer tool run times
• 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
• Air coupler and plug are factory installed on the air hose to save user labor and to prevent leaks
• 6-gallon pancake-style tank for stability includes water drain valve and rubber feet
• Low-amp 120-volt motor starts easily in cold weather or with an extension cord
• Equipped with a durable oil-free pump for long life and no maintenance
• Shroud, handle, and console cover protect vital components and make unit easier to carry

• Standard replacement pad for Porter-Cable 333 Random Orbit sander
• Ultra convenient dust collection feature
• Easy screw-on installation
• Five-inch diameter
• Prevents damage to disc holders

• 2.0 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
• 1.5 gal tank in shroud is easy to carry, includes water drain valve and rubber feet
• 150 psi max tank pressure stores more air in the tank for longer tool runtimes
• Durable oil-free pump for long life and no maintenance
• Low Amp 120V motor starts easily in cold weather or with extension cord

• 1500-Watt motor
• Dual fan speed selector
• Variable temperature control dial
• Integrated hands free support stand
• 6-Feet high grade cord

• Uses standard Senco Type, 22 ga. 3/8-inch crown staples from 1/4-inch to 5/8-inch long
• Small and lightweight for ease of operation
• 1-inch nose extension for limited clearance fastening
• Steel top cap for durability
• Rear exhaust port channels air and tool oil/condensation away from user; Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open

• Heavy-duty 6-Amp motor provides smooth cutting in hard materials
• 5/64-Inch depth of cut removes excess material in less time
• 0.47-Inch maximum rabbit depth removes more material per pass
• Uses carbide or HSS blades to provide flexibility to all blades available
• 11.5-Inch cast aluminum shoe provides added control and better finish quality

• Kerf cut indicators and integrated laser guides for improved accuracy on long cut
• 5,000 rpm for crosscutting dimensional lumber or ripping plywood
• Bevel edges between 0 to 45 degrees
• Independently certified to applicable standards
• 7-1/4 inch, 24-tooth carbide-tipped blade

• Lightweight at just 7.3-Pound
• Power to drive nails up to 3-1/2-Inch by 0.131-Inch into engineered lumber
• Tool-free adjustable depth of drive for proper setting of nail heads
• Selectable trigger with trigger lockout for restrictive or contact actuation mode
• Reversible rafter hook for hanging tool on left or right side

• Standard replacement pad for 340 finishing sander
• Can be used with standard sandpaper sheets or adhesive-back sheets and rolls
• Eight holes for dust collection
• Easy installation involves removing the mounting screws to replace the pad
• Use for a wide variety of sanding projects