| 69 Total Matches |
<< Previous Page
|
Page 1 of 7 |
Next Page >>
|
|
 |
Larger View
|
Zoeller 30-0181 Check Valve, 1-1/2 Inch
- 1-1/2 slip x slip unions
- Flapper bends over a radius to eliminate sharp 90-degree edges
- Capable of vertical or horizontal installation
- Slip x slip for 4.3 PSI (10 feet of head) at 130°F
- Designed to reduce water hammer
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp
- 1/3 H.P. motor
- 1-1/2" NPT Discharge & Passes 1/2" spherical solids
- Non-clogging vortex impeller design
- Durable cast iron switch case, motor, and pump housing
- Automatic with float activated switch
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
- Passes 1/2-Inch spherical solids
- On point: 9-1/2-Inch, off point: 3-Inch
- Pumps 72-Gallons per minute with 5-Foot head
- Shut-off head: 23-Feet
- Includes a 15-Foot 3-wire neoprene cord
Click here for details - reviews, specs and more.
|
|
|
|
|
Larger View
|
Zoeller 507-0005 Basement Sentry Battery Backup Pump
- Provides extra protection when the primary AC pump fails due to power outages, when the primary pump fails
- All models have battery burn out and overcharge
- Model 507 has a self contained 10 amp battery recharger
- All systems are fully solid state automatic controllers with alarms, light indicators and have warning systems
- NOTE: Sump Pump and Battery are not included, as they must be purchased separately
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller 57-0001 M57 Basement High Capacity Sump Pump
- Corrosion-resistant, powder-coated epoxy finish
- No sheet-metal parts to rust or corrode; all stainless steel screws, switch arm, guard, and handle
- Watertight neoprene square ring between motor and pump housing
- 1-1/2-inch NPT discharge and passes 1/2-inch spherical solids
- Equipped with a 0.3-horsepower motor
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
- Passes 1/2-Inch spherical solids
- On point: 7-1/4-Inch, off point: 3-Inch
- Pumps 43-Gallons per minute with 5-Foot head
- Shut-off head: 19.25-Feet
- Includes a 25-Foot 3-wire neoprene cord
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller M267 Waste-Mate Sewage Pump, 1/2 Horsepower, 115V
- 1/2 H.P. motor
- 2" NPT Discharge & Passes 2" spherical solids
- Non-clogging vortex impeller design
- Durable cast iron switch cap, motor, and pump housing
- Not effected by materials normally found in drainage and sewage sumps
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller 105-0001 Laundry Pump Package Including M53 Sump Pump
- Automatic, float operated mechanical switch 115V/1 Ph, all drain pump series
- 1-1/2" NPT discharge
- 9 ft. UL listed 3-wire cord and plug
- 1550 RPM, 60 Hz on 50 series models
- Non-clogging vortex impeller
Click here for details - reviews, specs and more.
|
|
|
|
Larger View
|
Zoeller 30-0151 2-Inch Cast Iron Slip x Slip Check Valve Union
- Full 2-Inch flow design - meets BOCA (P.604.2)
- 2 inch full flow pump code
- Stainless steel screws
- Extra wide hinge to reduce hinge stress
- Corrosion resistant powder coated epoxy finish
Click here for details - reviews, specs and more.
|
|
|
| 69 Total Matches |
<< Previous Page
|
Page 1 of 7 |
Next Page >>
|
|
